|
Aqua-Pure ICE160-S Commercial Ice Machine Water Filter 3.34 GPM
|
|
Colors displayed on screen may differ from actual product.
|
|
Shipping Charge FREE!
Usually Ships Within 24Hrs
Use Coupon AP5 at Checkout for Instant 5% Savings on Aqua-Pure!
|
- AquaPure/Cuno Model# ICE160-S
- AquaPure/Cuno Part# 56163-03
- ICE160-S Reduction Claims: Cyst, Bacteria, Sediment, Chlorine Taste and Odor, Scale
- ICE160-S Micron Rating: 0.2
- ICE160-S Capacity: 35,000 gallons (132,489 liters)
- ICE160-S Service Flow Rate: 3.34 gpm (12.6 lpm)
- ICE160-S Application: Most Normal Water
- ICE160-S Replacement Cartridge: HF60-S
- ICE160-S Sizing: Low Flow Ice Cubers to 1,450 lbs (659 kg), High Flow Ice Cubers to 1,000 lbs (454 kg), Ice Flakers to 2,400 lbs (1,089 kg)
- System includes a head assembly with pressure gauge, inlet-watershutoff valve assembly (comes with 1/2" NPT nipple), mounting bracket,and single cartridge filter
- Inlet and outlet plumbing connections are 1/2" FNPT
- Filter cartridges are double o-ring seal type
- System maximum operating pressure of 125 psi (862 kPa)
and operating temperature of 100°F (38°C)
- Recommended service flow rate is up to 3.34 gpm (12.6 lpm)
- Filter cartridges incorporate carbon block media protected bya pleated pre-filter membrane and a scale inhibitor
- System is NSF Standard 42 and/or CFR-21 compliant
- Cartridge body is constructed from high-impact glass-filledpolypropylene
- Cartridges are sanitary in design, requiring no contact with the filtermedia during cartridge change-out
- Filter cartridges require no pre-activation
- Use on cold water line only
- For commercial use only
- Do not install outdoors
- Do not exceed operating parameters for temperature or pressure.System maximum operating pressure of 125 psi (862 kPa) andoperating temperature of 100°F (38°C). If pressure exceeds 125 psi,a pressure limiting valve must be installed.
- Choose mounting location to support full system weightwhen operating
- Shut off downstream equipment prior to installation ofthe system
|
|
|
|
|